27
Set the desired front and rear suspension Low Speed Compression
(LSC) damper settings.
LSC settings function independently of Flight Attendant Modes and
remain set to the selected settings until changed manually with the
Flight Attendant Control Module.
As with standard suspension components, LSC adjustment only
affects OPEN position performance and has no effect on the PEDAL
or LOCK settings.
LSC can be adjusted from Auto Mode or Manual Mode.
Set Low Speed Compression (LSC)
Set Fork LSC:
From Auto Mode or Manual
Mode, press and release the Menu button
until the bottom left LED is blue; default
setting 1 (lowest LSC).
Each LED illuminates at two brightness levels. 10 settings are available.
Press the (
+
) button to increase LSC damping.
Press the (
−
) button to decrease LSC damping.
Press and hold the Menu button, or wait 10 seconds, to return to the previously activated
Mode.
Set Rear Shock LSC
: From Auto Mode or
Manual Mode, press and release the Menu
button until the bottom left LED is cyan;
default setting 1 (lowest LSC).
Each LED illuminates at two brightness levels. 10 settings are available.
Press the (
+
) button to increase LSC damping.
Press the (
−
) button to decrease LSC damping.
Press and hold the Menu button, or wait 10 seconds, to return to the previously activated
Mode.
Press & release
+
−
+
−