27
ROAM 60/50 & RAIL 50 Rear Hub Bearing Replacement
Install the drive side of the hub onto the Ring Nut Installation Tool.
Press down firmly and rotate the wheel to make sure that the teeth
of the tool engage with the ring nut.
Press down firmly and rotate the wheel counter-clockwise to
remove the ring nut from the hub. The rotor seal will also be
removed, and may fall over the ring nut tool onto the vise.
Remove the ring nut from the tool. Clean the ring nut and inspect
for any damage. Replace the ring nut if it is damaged.
Use a pick to remove the shim ring from the hub.
8
9
10