12
Power Meter Reboot
Install the battery compartment lid until it is handtight. Watch for the
LED to blink on; green for AXS and DZero power meters, and red for
Legacy power meters.
AXS Power Meters only
: Use your fingers to install the outer battery
cover.
If the LED blinks on, connect the power meter to the SRAM AXS App, Qalvin BLE, or Qalvin Legacy and update the power meter
firmware, if needed.
If the LED does
not
blink on and the power meter will not pair to a head unit, SRAM AXS App, or Qalvin:
AXS and DZero Power Meter:
Contact
or your Quarq® dealer.
Legacy Power Meter:
Perform the
Spider Inspection
steps in the following section.
This completes the troubleshooting for the Power Meter Reboot service.
Red LED
Legacy
Green LED
AXS
Green LED
DZero
5
AXS
AXS
6
7
