English
Page 12
Caution:
The SRAM P5 hubs are not
suitable for tandems, trademen’s
delivery bicycles and similar.
Caution:
The SRAM P5 Cargo is suitable
for tandems, trademen’s delivery
bicycles and similar. An additional
external rear brake is necessary
due to the high load.
Indentification SRAM P5 Cargo:
Yello grub screw inside the axle end.
S H I F T E R A N D C L I C K B O X
• Slide shifter (1,
Fig 5)
onto
handlebar.
• Mount fixed grip (2) onto end
of handlebar.
• Slide shifter against fixed grip,
adjust shifter on handlebar and
tighten with bolt (3) with a
torque of 1.5 Nm (13 in. lbs.).
Caution:
•
Check that the shifter and
brake lever function properly
and are unobstructed (realign
if necessary).
•
Fixed grips provide an axial
safety function. For this reason,
they should be mounted in such
a way as to make sure they do
not slip off handlebar.
•
Never use lubricants or sol-
vents to install fixed grips.
• When fitting the cable avoid
small radius. Attach the cable
3 times to the down tube.
• Last attachment point is on the
lower rear wheel fork immediately
behind the chain wheel.
Cable housing must be
movable inside attachment.
• Place shifter in gear position „2“.
• Push on Clickbox (4,
Fig. 5)
to the
stop on the axle. The red guiding
rib of the locating sleeve thereby
engages in the slot on the housing.
• Tighten knurled bolt (5,
Fig. 5)
by hand.
Assembly
5
1
4
5
2
3
Summary of Contents for P5 8/2005 40 Seiten
Page 1: ...N O 0 5 6 8 1 2 2 0 2 0 ...