Model SR755KG Series Wheelchair Scale
Operating and Service Manual - S/N 1913+
Part No.: MAN755KG_100929
Page 6 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2010
S
Instruments, Inc.
SYSTEM DESCRIPTION AND INTENDED USE cont’d
INTENDED USE
The SR755KG Wheelchair Scale System is specifically
designed for use as a portable patient weighing system
for ambulatory and non-ambulatory wheelchair bound
patients or those that need to be supported by a chair or
walker. Maximum weight capacity must not exceed
454 kilograms, gross weight.
MAINTENANCE and CLEANING
The SR755KG Wheelchair Scale System is
made of powder-coated aluminum casting with
stainless steel pipes. Exercise caution when
cleaning the display window as it is made of
clear polyester and can be scratched by
abrasive cleaners. Mild soap and water is
recommended for general cleaning and
disinfecting.
STORAGE and TRANSPORTATION
STORAGE
If storing this equipment for periods longer than three (3) months, remove the batteries. To
maintain proper operation of this instrumentation, storage and transport conditions should not vary
outside the following conditions: Relative Humidity 0% to 85%, Ambient Temperature -10
°
C to
+50
°
C (14
°
F to 122
°
F).
TRANSPORTATION
To transport the SR755KG, tilt the scale back and wheel to the new location. Lower the platform
back down to the floor being careful not to shock the scale.
WARNING
DO NOT use pressurized water or steam.
The scale system contains microprocessor
circuitry and strain gauge sensors that may
be adversely affected by exposure to such an
environment.
WARNING
DO NOT EXCEED
MAXIMUM WEIGHT LIMIT OF
454 KG
