Model SR725
i
Wheelchair Scale
Operating and Service Manual
Part No. MAN725
i
_MICROBAN_200603
Page 6 of 24
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY (Cont’d)
STEP 6: (OPTIONAL)
When received, the SR725i scale display will be positioned facing the
caregiver. To reposition the display to face the patient, remove the mounting screw and rubber
bumper from the display base (Figure 3). Rotate the display 180 degrees. Re-insert mounting
screw and rubber bumper and tighten.
Note
: To provide correct alignment and to secure the
display to the mast properly, ensure that threaded end of rubber bumper is threaded into the hole in
the display mast.
Figure 3: Display Mount
NOTE:
If an optional printer has been ordered, go to Page 7
“INSTALLING OPTIONAL
PRINTER”
before proceeding.
Figure 4: Display Unit
STEP 7
: Unscrew the Battery Cover Panel Screw (11) and remove the Battery Compartment
Cover (5) from the Display Unit (figure 4). Install the six (6) “D” cell batteries as indicated on the
plastic battery cradle. Replace the cover.
2
11