Model SR725
i
Wheelchair Scale
Operating and Service Manual
Part No. MAN725
i
_MICROBAN_200603
Page 20 of 24
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright 2020
S
Instruments, Inc.
CALIBRATION (Cont’d)
STEP 8:
Place the
FULL
weight from Step 3 on platform. Allow weight to stabilize. Press
UP
arrow to save change. Remove weight.
STEP 9
: Press
ENTER
to save the calibration, or
WEIGH
to exit without saving
.
STEP 10:
Switch the scale system out of the Calibration Mode on the display board (Figure 13).
STEP 11:
Reinstall the side cover onto the display housing and secure in place with three (3)
mounting screws.
CONFIGURING SEND BUTTON
STEP 1:
Press the “
MENU
” key until “
DATA OUT = PRINT
” is displayed
STEP 2:
Press “
UP
” or “
DOWN
” key to select between “
EHR
” and “
”
STEP 3:
Press the “
ENTER
” key to save
EHR OUTPUT
Electronic Medical Records (EMR) / Electronic Health Records (EHR) technology is supported by
the i-series scales from SR Instruments. The EMR/ EHR software is not included with scale.
There are many different EMR/ EHR software available and the connectivity of the scale to the
software requires the services of a professional.
A null modem cable is required to communicate with the scale.
Scale output when send button is configured to Electronic Health Records is as follows:
<esc>R<esc>Wnnn.n<esc>Hmmm.m<esc>Bkk.k<esc>Uuu<esc>E
Where
:
R is read
W is weight
nnn.n is the weight in Lb or kg
H is height
mmm.m is the height in inches or cm.
B is BMI
kk.k is the BMI
U is units (lb or kg; in or cm)
uu is LB or KG
E is end of packet.