Manual | Lumino 200W LED Fresnel RGBW
SAFETY WARNING
1. Warning
•
Every person involved with the installation , operation and maintenance of this device has to be
qualified .
•
User must follow the instructions of this manual
•
Unqualified person can not open the housing cover and operate the device , or the dealer will
not accept liability for any resulting defects or problems.
•
The device against rain and moisture
2. 2. Waring notes
•
Power supply : AC 100V-240V , 50/60Hz
•
Make sure the power switch is off , the power plug , outlet and the earth connection is in well
condition before connecting the device with the mains.
•
Please use qualified power plug and the outlet. Never connect the power cord of this device with
other electrical equipment.
•
During move and installation , make sure the device not crashed with metal parts and other
tough materials.
•
Always disconnect from the mains, when the device is on the installation and dismantled
•
The minimum distance between light-output and the illuminated surface must be more than
50cm
•
The device must only be installed on a non-flammable surface . In order to safeguard sufficient
ventilation , leave 50cm of free space around the device . Please note that heat-sensitive objects
may be deformed or damaged by the emitted heat .
•
During the operation the housing becomes very hot ! Do not operate the device for 15 minutes
after switching off .
•
The maximum ambient temperature Ta = 45°C must never be exceeded , The maximum housing
temperature Tb = 80°C must never be exceeded .
•
For indoor use
•
Replace any visible cracked protective shield , filters and lens .
•
The protective shiel, filters and lens will require weekly cleaning as smoke “Cfluid tends to buil-
ding up residues , reducing the light “Coutput very quickly.
