background image

SQPC 5589 / 8306 30-11-2018

 | SQ Professional Ltd © 2019 All rights reserved

BLITZ POWER JUICER INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

6

Care and cleaning

When using certain foods some 

discoloration or staining of the plastic 

may occure, which is perfectly normal.  

To prevent discolouration wash the 

stained parts immediately after use. 

 1 

Unplug the appliance from the main 

socket, then lower the interlocking 

safety arm

 

(1)

 to unlock the lid.

 2 

Remove the juicer cover 

(6) 

and 

scrape any excess pulp into the pulp 

container 

(5)

.

 3 

Remove the pulp container by tilting it 

back. Empty and clean thoroughly. 

 4 

Remove  the  mesh  filter 

(4)

 by lifting 

the juicing bowl; this will unlock the 

mesh filter.

 5 

Thoroughly clean the fine mesh of the 

micro mesh filter, ideally with a brush. 

Ensure  that  the  fine  mesh  holes  are 

not blocked. 

 6

  If  the  micro  mesh  filter  can  not  be 

cleaned immediately after use, soak the 

filter in warm soapy water immediately 

after you finish juicing.

 

Clean all the parts in contact with 

food using warm soapy water and a 

soft brush. 

The cutting blade is very 

sharp. Handle carefully!

 

 

Never immerse the main housing in 

water or any other liquid.

 

    Wipe the housing with a damp cloth 

and dry immediately with a soft cloth 

to avoid scratches and water marks on 

the surface.

 

All accessories except the main 

housing can be washed by hand or 

in a dishwasher. Use warm water 

and mild washing up detergent when 

hand-washing. 

10

 If using a dishwasher make sure that 

the water never exceeds a maximum 

temperature of 50˚C.

 11 

Do not use abrasive or corrosive 

cleaning agents, harsh scourers or 

metal brushes to avoid damage.

Storage

Make sure that your appliance and all its 

accessories are completely dry before 

putting them away. Store the appliance in 

a clean and dry place.

Wiring UK plugs

Should the power cable or the power 

plug become da maged, arrange for 

these to be replaced by Customer 

Servi ce or qualified person before 

continuing to use the appliance.

 

The product has a 

13A BS1362

 fuse in a 

13A BS 1363 plug. 

Environmental protection

To avoid environmental 

and health problems due 

to hazardous substances 

in electrical and elect ro nic 

goods, appliances marked 

with WEEE symbol must 

not be disposed of with 

unsorted municipal waste, but recovered, 

reused or recycled.

Summary of Contents for Power Juicer









Reviews: