1
Read all instructions carefully before using the appliance.
2
This appliance is intended for household use only.
It is not suitable for commercial use such as staff
kitchen areas and other working environments.
3
Ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top.
Do not place the
appliance onto a metal tray or metal surface whilst in use.
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven. Do not operate the appliance with
wet hands or barefoot.
4
Keep the appliance and mains cable away from the edges of
work tops and out of reach of children. Route the cable so
it does not overhang, and cannot be tripped over or caught.
5
Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as cooker. Heat may damage the mains cable.
6
The connections on both sides of the mains cable (the
appliance and socket) should never be strained. If the mains
cable is damaged it must be replaced by qualified person or
service to avoid any hazards.
7
Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water or
other liquids to protect against fire, electric shock
and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9
This appliance must not be operated by an external timer or a
remote control system.
10
SQ Professional Ltd may not be held liable for eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
11
The surfaces of the toaster should always be kept dry Before
drying disconnect the power supply; ensure that the toaster
completely dry before you reconnect it to power supply.
12
To remove the bread from the toaster, ensure that the toaster
has stopped heating then push the loading lever up and
hold it to remove the bread. We recommend using tongs as
the bread will be very hot.
13
Do not move the toaster when it is switched on.
14
Do not switch the toaster on unless it contains at least one slice
of bread.
15
Always close the crumb tray
6
before you switch the toaster on.
Avoid contact with toaster surfaces as they will
become very hot.
16
The loading lever
1
should never be forced up as this may
cause the damage to the automated release mechanism.
When toasting is finished, the lever will release automatically.
17
Unplug the toaster from the socket and let it cool down
completely before cleaning or removing the crumb tray
6
. Ensure
that the toaster is completely cooled down before cleaning
and storing away. Keep the toaster, cable, and plug away from
sources of heat. Store in a dry place.
18
Do not use the toaster for any purpose other than
toasting bread.
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
All images are for illustration purposes only. Actual products may vary.
ImPoRTAnT SAFEgUARDS
Dainty™ Legacy Toaster Instruction Manual
