SPYKER SPY50L-2S Operator'S Manual Download Page 19

Page: 19 / 20

Page 19

1019225-D

Deflector Settings

HIGHEST

SETTING

DEFLECTION

When the deflector is at the

highest position, it enables a

full spread pattern.

WIDENING

THE SPREAD

AREA

LOWEST

SETTING

100%

DEFLECTION

When the deflector

is at the lowest position, the

spread width will be

approximately 3 feet.

NARROWING

THE SPREAD

AREA

ADJUSTING THE DEFLECTOR

1. To move the deflector, stand in front of the spreader and plant your feet

just before both wheels to prevent movement.

2. Grasp the deflector (as illustrated here) on both sides and pull toward

yourself while raising or lowering to the desired setting.

NOTE:
Moving

the deflector

increases

the spread

width.

STRIPING ISSUES?

IF YOU FIND THAT THE MATERIAL IS STRIPING HEAVY ON

THE LEFT SIDE OF THE SPREAD WHEN THE DEFLECTOR IS IN USE:

Reduce the gate opening until the distribution is uniform.

Summary of Contents for SPY50L-2S





















Search results

Summary of Contents for SPY50L-2S

Reviews:

Related manuals for SPY50L-2S

Brands by name

Popular brands

SPYKER SPY50L-2S, Operator'S Manual

Search results

Summary of Contents for SPY50L-2S

Reviews:

Related manuals for SPY50L-2S

Brands by name

Popular brands