background image

English Manual

Page 4

1019548-A

Safety 

OPER ATING SAFELY

Recommended UTV Models 

Reference the below UTV model chart for the 
vehicles 

that the 

KSPLS15-HITCH

 is recommended 

for:

NOTE:
• It is not recommended 

that 

the KSPLS15-HITCH 

is 

used on a make or model UTV that is not listed.

• For questions regarding the fit up to UTV makes and

 

models not listed contact Spyker customer service at

800-

972-6130

UTV Model Chart for 

KSPLS15-HITCH

UTV Make

UTV Model

Polaris

Ranger 800 EFI HO

Ranger 400

Ranger 800

Ranger 900

Deere

XUV Sport RSX

XUV 550 Camo

XUV 550 s4

Kubota

RTV 500

RTV 1100

RTV X

NOTE:  GVW must be lower than GVWR 

(See Vehicle Operators Manual for rating). If not, do not operate 
vehicle and reduce weight until GVW is lower than GVWR.

UTV - Mounting Hitch to Utility Terrain Vehicle

The following UTV specifications are recommended. Review  
your Vehicle Operators Manual for your vehicle specifications.

• Must have a 2.0" receiver hitch or an adaptor to accept a

2.0" receiver hitch 

AND

• Minimum vehicle dry weight of 1050 lb 

AND

• Minimum wheelbase of 70.9" 

AND

• Minimum payload capacity of 800lb 

AND

• Vehicle tire pressure is at manufacturer's recommended

settings 

AND

• The Gross Vehicle Weight (GVW) must never exceed the

Gross Vehicle Weight Rating (GVWR) of machine. Failure

to do so may limit a machines handling characteristics.

To calculate GVW, add the following: 

(A) Empty Vehicle Weight

(Full fluids. See vehicle operators manual)

(B) Occupant Weight

( Passenger if applicable)

(C) Cargo Box Load Weight

(Do not exceed maximum cargo box capacity)

(D) Optional Vehicle Accessories Weight

(Cab, snow blade, etc)

(E) Spreader Weight

(See capacities section)

(F) Weight of Material in Hopper  

(Do not exceed

Hopper Capacity. See Capacity Section)

(G) Weight of Spreader Mount

____________________________________

 GVW  =  A + B + C + D + E + F + G

Summary of Contents for KSPLS15















Reviews: