19
DIAGNOSTICS
The DIAGNOSTICS main page will give you information on
the MODULES in you coach including: the STATUS (BLUE or
GREEN light active), FIRMWARE and CONFIGURATION.
The ENTRY and MAIN LCD refer to the 10” display
touch panels.
The AIRCON MODULE is located inside the air conditioner
interior control center. This module controls the functions
of the air conditioner and communicates the with the G12
MODULE.
The VENT FAN MODULE located under the vent fan trim
ring. This module controls the functions of the vent fan and
communicates the with the G12 MODULE.
The AC POWER MONITOR MODULE (120 VOLT AC) is
connected directly to the AC distribution panel. This module
communicates AC POWER output, consumption and frequency
to the G12 MODULE.
The DCM3 is part of the battery shunt system and is located
above the battery box. The DCM3 monitors the battery status
and communicates it to the G12 MODULE.
The SOLAR CONTROLLER communicates the with the G12
panel the status, type of charge, temperature, panel voltage,
charge voltage, amperage and history of the solar charge.
The TRUMA and RV-C BRIDGE work in conjunction with the
TRUMA CP PLUS controller and the bridge module to control
both the Truma Aquago water heater and the Truma Vario
heat furnace.
