How to record a video file:
● Press and hold the on and off unlock button for 3 seconds until a the red light comes on
● Wait for the red light to begin blinking, indicating that the device is ready
● Press and hold the trunk button for 3 seconds
● The LED light will begin to slowly blink indicating a recording has begun
● To stop the recording press the unlock button and the red light will appear, showing the
device has saved the file and is now in standby mode
● To turn off the device press and hold the unlock button and the red light will blink rapidly
and disappear, turning the device off
How to turn on motion activation:
● When in standby mode, press and hold the lock button for 3 seconds
● The LED light will begin to blink and disappear slowly, indicating motion activation
recording has begun
● When the device notices movement, the red LED will flash on and then off
● To stop the recording press the unlock button and the red light will appear, indicating the
device is in standby mode
● To turn off the device, press and hold the trunk button and the red light will blink rapidly
and disappear, turning the device off
Note: Motion activation will not extend the battery life of the device. If the device runs out
of power during the recording, it will finalize and save the file before the battery dies.
How to turn on the night vision:
● When either recording or in standby mode, tap the lock button
● On the front of the device, next to the camera, a faint red IR light will turn on
● To turn off the device, tap the lock button
How to take a photo:
● When in standby mode, tap the trunk button, and the red light will blink and then return
to a solid red LED indicating a picture has been taken, and the device has returned to
standby mode
