SPXFLOW Universal 5000 Industrial Series, Instruction Manual

Page: 28 / 58

26
95-03012
GREASE
MODEL 5040
Shaft Assembly
1. Front Bearing Assembly
a. Coat front bearing area of shaft with grease.
Place upright in hydraulic press with spline
end down.
c. Place front bearing over shaft with shield side up.
Press onto shaft until seated against shaft shoul-
der. (See Table 4 on Page 35.)
b. Unwrap front bearing assembly.
SHIELD
FRONT
BEARING
PRESS AGAINST
INNER RACE
ONLY
PRESS AGAINST
INNER RACE ONLY
f. Slip rear bearing over shaft with shield side down.
Press bearing onto shaft until it seats against
spacer and front bearing.
d. Place spacer over shaft onto bearing.
e. Coat shaft rear bearing area with grease.
REAR
BEARING
SPACER
SECTION IX
ASSEMBLY PROCEDURES