![SPXFLOW APV CU4plus AS-i Instruction Manual Download Page 37](http://html1.mh-extra.com/html/spxflow/apv-cu4plus-as-i/apv-cu4plus-as-i_instruction-manual_1352861037.webp)
APV_CU4plus_AS-interface_UK-3_062019.indd
UK
Control Unit
CU4plus AS-interface
Instruction Manual UK-3
APV
37
6. Electronic Module
6.7.
AS-i communication / Data signals
6.7.6. AS-i parameter data / status / diagnosis
AS-i
parameter data
(inverted)
inputs
outputs
PI3
not occupied
PO3
not occupied
PI2
Teach mode
PO2
not occupied
PI1
Aux. Voltage
PO1
not occupied
PI0
Service requ.
PO0
not occupied
AS-i
status
inputs
S3
EEPROM error
S2
Automatic "unique" duplicate address detection
S1
Periphery fault
S0
Address not permanently stored
AS-i
diagnosis
inputs
0
Air pressure availed
1
Teach-in-successfully completed
6.8.
Service and Maintenance Software CU4plus Toolbox
For the parameterization of the CU4plus AS-i the CU4plus Toolbox
Software is available.
This software is designed for PC system software Windows 7,
Windows 8.1, Windows 10.
After installation of the CU4plus Toolbox the corresponding control
unit is connected with the PC by means of an adapter cable.
The individual functions are described in the CU4plus Toolbox
manual.