RD5100H
2
O+ Operation Manual
14
© 2018 Radiodetection Ltd
Figure 4.12 - Charging the locator Li-ion battery pack
Transmitter Li-Ion battery pack
To recharge the battery pack, remove the pack from the
transmitter and connect the transmitter battery charger.
Figure 4.13 - Charging the transmitter Li-Ion battery pack
For more information about recharging batteries see the
instructions that came with your charger.
4.2 Power on / off
Switch the locator or transmitter on by pressing the
key.
To switch the locator or transmitter off, press and hold
the
key until the screen blanks off.
NOTE. The locator will automatically power off after 5
minutes if no keys are pressed.
4.3 Keypad actions & shortcuts
Locator key actions
Table 4.1 - Locator key actions
Key
Short press
Long press
Enter the menu
Switch power off
Scroll through locate
frequencies from low to
high
-
When using active
frequencies:
Turn Target Position
Indicator (TPI)
ON/OFF.
-
Increase and decrease
gain.
RD5100H
2
O+
automatically sets gain
to mid-point when
pressed
Rapidly increase and
decrease gain steps
in 1dB increments
Send iLOC command
to a paired transmitter
Enter the Transmitter
power setting for use
over iLOC