RD5100H
2
O+ Operation Manual
© 2018 Radiodetection Ltd
9
3.2 RD5100H
2
O+ transmitter
Transmitter features
1 LCD.
2 Keypad.
3 Bluetooth® module.
4 Removable accessory tray.
5 Side support.
6 Speaker (internal).
7 D-cells battery holder.
8 Optional Lithium-Ion rechargeable battery pack.
Accessory tray contents
9 Earth stake: Spiral earth stake.
10 Magnet: Hi-strength magnet with M4 eyebolt.
11 Earth lead: Earth spool 10m.
12 Direct connection lead: Transmitter direct connection
lead.
Transmitter keypad
13 Power key
: Switches the unit on and off.
Opens the transmitter menu.
14 Frequency key
: Selects frequency.
Menu navigation key.
15 Measure key
: Used to take voltage and
impedance measurements.
Opens a sub menu.
16 Down arrow
key: Adjusts the output signal level.
Scrolls through the menu options.
17 Up arrow
key: Adjusts the output signal level.
Scrolls through the menu options.
Transmitter screen icons
18 Battery icon: Indicates the battery level.
19 Standby icon: Appears when the transmitter is in
Standby Mode.
20 Output level: Displays an indication of transmitter
output power as a bargraph.
21 Clamp icon: Indicates when a signal clamp or other
accessory is connected.
22 Bluetooth
®
icon: Indicates status of Bluetooth.
23 Voltage warning indicator: Indicates that the
transmitter is outputting potentially hazardous voltage
levels.
24 Volume icon: Displays the volume level.
25 Output power level: Displays the output power in
watts or as a percentage.
26 Resistance measurements: Displays the resistance
or current in Direct Connection mode.
27 Alphanumeric description of selected operation
mode.
28 Accessory or Measurement indicators: Indicates if an
accessory is connected or if measure mode is active.
29 Induction indicator: Appears when the transmitter is
in Induction mode.
30 CD mode: Indicates that the transmitter is in Current
Detection mode.
31 A-Frame: Indicates when the transmitter is in Fault-
Find Mode.
32 DC icon: Appears when the transmitter is powered
from a DC source.
3.3 Using the locator and
transmitter menu
The RD5100H
2
O+ locator and transmitter menus allow
you to select or change system options. Once entered,
the menu is navigated using the arrow keys. Navigation
is consistent on both the transmitter and the locator. In
the menu the options will appear in the bottom left-hand
corner of the display.
Note. When you browse the locator menu, the
and
keys act as left and right arrows. When browsing the
transmitter menu the
and
keys act as left and right
arrows. The right arrow enters a submenu and the left
arrow selects the option and returns to the previous
menu.
Navigating the locator menu
1 Press the
key to enter the menu.
2 Use the
or
keys to scroll through the menu
options.
3 Press the
key to enter the option's submenu.
4 Use the
or
arrows to scroll through the
submenu options.
5 Press the
key to make a selection and return to
the previous menu.
6 Press the
key to return to the main operation
screen.