9
Form No. 1000853
Rev. 4 October 8, 2018
© 2018 SPX FLOW, Inc.
DISASSEMBLY / MAINTENANCE / SERVICE
• Regularly inspect all components to detect any problem requiring service or maintenance.
• To prolong the life of your SPX equipment, follow points below:
1. Clean and grease contact surfaces shown below with high pressure quality grease.
2. Ensure smooth rotation of link plate joints and keep them lightly greased.
3. Keep general tool condition clean.
• (Upper Left Picture) – Unscrew the indicated screws
about 4 mm (.2 inches) to “unlock” the shoes. Work the
shoes loose from the residual grease to open them.
• (Lower Right Picture) – Clean the indicated surfaces
with a degreasing agent. Then, re-grease the same
with quality, high-pressure grease. Close the shoes and
torque (tighten) the screws to 34 Nm (25 ft. lbs.).
Both Sides
of Wedge
* Both Slots of
Wedge
Inside of Both
Shoes
Inside of Both
Shoes
* Other slot is on
opposing side of
wedge.
