flexitrax™ flexiprobe™ Operation Manual
4 System assembly
85
Fig. 4-23: Link cable (1) connects to the pushrod reel (2)
Tighten the connectors finger-tight but do not use a wrench, spanner or pliers.
Note: You must select the reel type when you power on the controller see
section 5.5.4
Clamp assembly
Use the supplied clamp (optional on 541) to attach the Controller onto the pushrod reel. If the clamp is
supplied separately from the reel, follow the steps below to disassemble it and attach it to the reel:
1. Remove the black handle, by rotating anti clockwise. Place safely to one side.
2. Slide washer and collar off the shaft and place safely to one side.
1
2
