12
4. Use the or keys to scroll through the submenu options.
5. Press the
key to confirm a selection and return to the previous menu.
6. Press the key to return to the main operation screen.
NOTE: When you select an option and press the
key, the option will be
enabled automatically.
Locator menu options
• VOL: Adjust the speaker volume from 0 (mute) to 5 (loudest).
• UNITS: Select metric or imperial units.
• LANG: Select menu language.
• POWER: Select local power network frequency: 50 or 60Hz.
• ANT: Enable or disable any antenna mode with the exception of Peak.
• FREQ: Enable or disable individual frequencies.
• ALERT: Enable or disable Strike
Alert
™.
• BATT: Set battery type: Alkaline or NiMH.
• ARROW: Select proportional Guidance arrows in Peak+ mode
• COMPA: Enable or disable display of the Compass feature.
• VALRT: Enable or disable the vibration feature.
• AUDIO: Select High or Low sound levels.
• SWING: Enable or disable Swing warning.
• INFO: Shows the software version, run a Self-Test, display the date of the most
recent service recalibration (M CAL) or the most recent eCert calibration.
Transmitter menu options
• VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
• FREQ: Enable or disable individual frequencies.
•
BOOST: Boost transmitter output for a specified period of time (in minutes).
• LANG: Select menu language.
• BATT: Set battery type: ALK, NiMH and enable / disable Eco mode.
• MAX P: Set the transmitter to output its maximum wattage.
• MODEL: Match the transmitter setting to the model of your locator.
• MAX V: Set the output voltage to maximum (90V).
• INFO: Shows the software version
