Handling the Remote Controller
NOT SURE WHAT
A
FUNCTION DOES?
Refer to the
Operation Instructions section
of
this
manual for a detailed description on
how
to use
your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ
slightly
from the example shown. When there are wide
differences between
Remote controller
illustration and USER'S MANUAL on function
description,
the description of USER'S MANUAL
shall prevail.
Inserting and Replacing Batteries
The remote controller is powered by two AAA
batteries (not included). The batteries are
housed
in the back of the remote, protected by
a cover.
Place batteries in the remote control
before use.
1. Press down on the cover and slide it
outwards
to remove.
2. Insert batteries, paying attention to match
the
(+) and (-) ends of the batteries with the symbols
inside the battery compartment.
3. Slide the battery cover back into place.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or
batteries of
different types.
Remove batteries if the remote will not be
used for
more than 2 months
TIPS FOR USING REMOTE CONTROL
The remote control must be used within 8
meters of the unit.
The unit will beep when remote signal is
received.
Curtains, doors, other barriers and direct
sunlightcan interfere with the infrared signal
receiver.
17
