Uper air lter
(take out)
Lower air lter
(take out)
Remove the
upper drain plug
Continuous
drain hose
12
Operation
Continuous Drainage for DRY mode (optional)
- Remove the upper drain plug
from back of unit.
- Connect drain hose to spout.
- Position the open end directly over drain area.
Emptying the Water Tank
When the water in the bottom tray reaches its maximum
capacity, the unit will beep 8 times and display will show
“P1”. At this time, the compressor will immediately stop
(Cool or Dry) but fan will continue to operate.
Note: Make sure
connection is secure
to prevent leakage.
Make sure there are
no kinks that may stop
the water ow. Do not
raise the hose upwards.
- Place a collection pan underneath
the drain spout or carefully move
the unit to a drain location.
- Remove the bottom drain plug and
water will begin to drain out.
- Replace the drain plug and restart
unit. P1 indicator should disappear.
Maintenance
Safety Precautions
- Always unplug the unit before cleaning or servicing.
- DO NOT use ammable liquids or chemicals.
- DO NOT wash the unit under running water.
- DO NOT operate the machine if power cord is damaged.
Contact Sunpentown or a qualied electrician.
UNIT HOUSING
Use a lint free cloth soaked with neutral detergent to clean
the housing. Finished by a dry clean cloth.
FILTERS
Clean the lters at least once every two weeks to prevent
inferior fan operation due to dust accumulation.
- Clean lters by washing in warm water (40°C/104°F)
with a neutral detergent. Rinse clean and allow to dry
in a shady area - do not place under direct sunlight.
Filter Removal
This unit has two lters.
- Upper lter: pull and remove
according to arrow direction.
- Lower lter: remove the
screw to remove lter.
