Lowing: lift up the head with a hand, unscrew the fastening knob counterclockwise
with the other hand, slowly lower the head to an appropriate height, and tighten the
knob clockwise. Rising: lift up the head with a hand, unscrew the fastening knob
counterclockwise slowly with the other hand, rises up the head to a proper height,
and tighten the knob clockwise.
IV
. Height Adjustment
When adjust the pivoting angle, fix the guards with hands and reverse the head of fan.
Note: Do not forcibly twist the fan in order to avoid damage to the fan.
V
. Pivoting Angle Adjustment
Press the “On/Off" button for three seconds, the screen will turn off and the fan is still
running. Press any button [not include "On/Off” button), the screen will light up.
Remote control does not have this feature.
VI
. Screen-off Function
The fan will be turned off when there is no operation within 12 hours.
VII
. Forced Shutdown
Batteries should be installed before using the remote control. It uses a 3 -volt button
battery.
(1) Open the battery cover;
(2) install a new battery, pay attention to the battery polarity (+ and -);
(3) Close the battery cover.
BATTERIES INSTRUCTIONS (Fig.7)
The windings of the motor have a thermal-fuse that burns out and the fan switches
off and temperature of the motor is no longer going up so that plastic parts of the fan
don’t subject to deformation so far so to be burned by the overheat if the motor is
overheat for any unexpected reason.
OVERHEAT PROTECTION OF THE MOTOR
1. The remoter controller must point to the receiving window of the fan box when it
is used;
2. The remoter controller can be normally used within five meters and 30 degrees
from the fan;
3. Avoid direct sunlight on the receiving window, so as not to affect the receiver's
effect;
4. Remove the built-in batteries when do not use the remote control for a long time
or before the batteries are leaked.
HOW TO USE THE REMOTE CONTROLLER CORRECTLY
5