SPT SF-16D31 Owner'S Manual Download Page 2

Front Guard

Center Piece

Circlip

Clip

Plastic Nut

Control Part

Remote 

Control 

Hook

Base

Pole

Knob

Tighten

Loosen

Spinner

Rear Guard

Shaft

Motor

Screw

Power Cord

Female Terminals

Blade

Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between

         the real object and the illustration in the drawing shall be subject to the real subject.

1

Read Rules for Safe Operation and Instructions Carefully. 

1. This appliance has a polarized plug (one blade is wider than the other). To reduce

    the risk of electric shock, this plug is intended to fit in a polarized outlet only one 

    way. If plug does not fit fully in the outlet, reverse the plug. If it still does not fit, 

    contact a qualified electrician. Do not attempt to defeat this safely feature. 

2. To reduce the risk of fire or electric shock, do not use this fan with any solid state 

    speed control device.

1. Never insert fingers, pencils, or any other object through the grille when fan is 

   running.

2. Disconnect fan when moving from one location to another.

3. Disconnect fan when removing grilles for cleaning.

4. Be sure fan is on a stable surface when operating to avoid overturning.

5. Do not use fan in window. Rain may create electrical hazard.

6. Ensure that the fan is switched off from the supply mains before removing the grille. 

The rules about cord and plug as below:

1. This product employs overload protection (fuse). A blown fuse indicates an 

    overload or short-circuit situation. If the fuse blows, unplug the product from the 

    outlet. Replace the fuse as per the user servicing instructions (follow product 

    marking for proper fuse rating) and check the products. If the replacement fuse 

    blows, a short-circuit may be present and the product should be discarded or 

    returned to an authorized 

    service facility for 

    examination and/or repair.

2. Do not operate any fan with 

    a damaged cord or plug. 

    Discard fan or return to an 

    authorized service facility 

    for examination and/or 

    repair.

3. Do not run cord under 

    carpeting. Do not cover 

    cord with throw rugs, 

    runners, or similar coverings. 

    Do not route cord under

    furniture or appliances. 

    Arrange cord away from 

    traffic area and where it will 

    not be tripped over.

CAUTION

WARNING

PART FIGURE

RULES FOR SAFE OPERATION

Summary of Contents for SF-16D31









Reviews: