SPT IM-600US Instruction Manual Download Page 2

Page: 2 / 14

TABLE OF CONTENTS

Page

ICE MAKER SAFETY …………………………………………………………………2

ELECTRICAL CONNECTION ..……………………………………………………....2

SAFETY PRECAUTIONS ……………………………………………………………..3

TECHNICAL INFORMATION ………………………………………………………..3

COMPONENTS ………….………………………………………….………………. ..4

INSTALLATION INSTRUCTIONS ……………………………………………….5-7
Location requirements
Installation
Reversing the door
Connecting the water supply
Installation types

OPERATING YOUR ICEMAKER ……………………………………………….…8-9
Operation checklist
Operation of the icemaker
Understanding the icemaker
Control box

CARE AND MAINTENANCE ………………..……………………….…………10-11
Cleaning your icemaker
Power failure
Vacation time and storage
Moving your icemaker

TROUBLESHOOTING ……………………………………………………..………..12

This owner’s manual is provided for reference only. Specifications may change without
prior notice. You can always check the back label of your icemaker for the most updated
technical information.

Summary of Contents for IM-600US















Search results

Summary of Contents for IM-600US

Reviews:

Related manuals for IM-600US

Brands by name

Popular brands

SPT IM-600US, Instruction Manual

Search results

Summary of Contents for IM-600US

Reviews:

Related manuals for IM-600US

Brands by name

Popular brands