10
is corresponding with button
【
FEED
】
, it is used to chose the setting parameters .
is corresponding with button
【
MODE
】
, it is used to chose the setting parameters .
After settings, press both
【
FEED
】
and
【
MODE
】
buttons to save the settings, and enter the normal
switched on situation, or it cannot be saved.
In this screen, either
【
FEED
】
or
【
MODE
】
button is pressed can enter into the first setting
parameter mode. For more detailed setting methods, you can find in the appendix.
Chapter 4 Other Information
4.1 Command Programming Manual
<T7Technical Manual> is a technical manual for engineer to develop printer utility, and users
can claim our company for it. This manual including the technical description of hardware
interface (Bluetooth, USB interface ), technical documentation of printing control command set,
and others such as how to print black mark and locate by it.
4.2 Description of Black Mark Pre-print
If user use pre-print black mark to locate the receipt, please be sure to abide by the following
black mark pre-print regulation when print the black mark paper, if not, it will cause that the
printer can not identify the black mark.
The black mark pre-print regulations are as below:
Printing Position: As the picture above, the black mark should be printed on the right or left edge
of the side of words.
Width range: width ≥ 7mm
