５
2.1 Printer Appearance
2.2 Paper Installation
SP-POS58 adopts 57.5
±
0.5mm width thermal paper.
The steps of thermal paper installation are as the following:
Hold down the upper cover button, open the movable upper cover, move
away the old paper roll, and put the new thermal paper in the paper holder
of printer, draw a certain length of the paper roll, put the paper end on the
print head, close the upper cover and press it downwards lightly until it
restore to original position, and the paper end appears from the paper-out
slot which is on the upper cover, then print paper installation is finished.
SPRT
Компания АВИОР
www.avior.ru
