１２
×
×
D5 D4
×
×
×
1: Double Width Print
AAA
Explanation:
Set line spacing to n dot lines. n=0~255.
One dot line is 1/203 inch for SP-POS58
Ⅳ
, this command sets the dot-line
spacing to n/203 inch. Default n=30.
Example:
BBB
n=30, 30 dot spacing (30/203 inch)
3.2.3 Character Print Commands
ESC
！
Set Character Print Mode
Format: ASCII:
ESC
！
n
Decimal:
27
33
n
Hexadecimal: 1B
21 n
Explanation:
ESC
！
n is a comprehensive command to set character print mode, is used
for selecting print character size. Each bit of print parameter n is defined:
1: Double Height Print
Default n=0, that means no character enlargement.
ESC SO
Set Double Width Character Print
Format: ASCII:
ESC
SO
Decimal:
27
14
Hexadecimal:
1B
0E
Explanation:
All characters following this command on the same line are printed in
double width, this command can be canceled by a carriage return or DC4
command.
ESC DC4
Cancel Double Width Character Print
Format: ASCII:
ESC
DC4
Decimal:
27
20
Hexadecimal:
1B
14
Explanation:
After carrying out this command, the characters will be printed in normal
width.
SPRT
Компания АВИОР
www.avior.ru
