１０
Recommend using the power supply that offered by the printer
producer, you can plug the power cable into the printer
’
s power
socket, if use other power supply, it should meet the specified
voltage and power demands, and the connection should be correct,
otherwise it can't guarantee the printer works normally, even may
damage the printer.
2.4 Buttons and Indicators
There are two buttons and two indicators on the printer of SP -POS58
Ⅳ
.
The red light is power indicator, the green one is status indictor, status
indicator lights under on-line status, it goes dark under off-line status, it
flashes when paper is out.
SP-POS58
Ⅳ
has
【
LF
】
paper feed button and opening upper cover button,
print command can enable or disable
【
LF
】
on or off, under enable status,
hold down
【
LF
】
,start paper feeding, release the button paper feeding
stops. Hold down opening upper cover button, open the upper cover in
order to change paper.
2.5 Self-test
The self-test can check the condition of printer, if the printer prints out the
self-test receipt correctly, it means the printer works normally. Otherwise it
needs to repair.
The self-test will print out the firmware version, interface setting and 128
ANK characters.
Holding down
【
LF
】
button and turn on the power, then release the button,
self-test begins automatically.
Chapter 3 Print Control Commands
3.1 Summary
SP-POS5
8
Ⅳ
offers ESC/POS print command sets.
Each command is described in following format:
Print Command
Function
Format: ASCII:
the standard ASCII character sequence
Decimal:
the decimal numbers sequence
Hexadecimal: the hexadecimal number sequence
Explanation: what the command does and how to use it.
Example: some examples are listed to illustrate the command for better
understanding.
SPRT
Компания АВИОР
www.avior.ru
