18
power switch, and release the [FEED] key after the status indicator and the out of paper indicator
flash alternately. Then press the [FEED] key five times, and then close the upper case. The
printer enters the program upgrade mode. At this time, the red [PAPER] indicator flashes at a rate
of about 1 second. Use the "UpdateFirmware.exe" (PC-side upgrade tool) upgrade tool to
upgrade.
b. Upgrade in normal working mode:
Connect the USB data cable to the computer, and the printer is turned on normally and there is
no abnormal alarm. At this time, it can be upgraded through the PC-side upgrade tool.
1. Open the "UpdateFirmware.exe" upgrade tool.
2. Select the USB port, open the port, select the "firmware file" that needs to be upgraded, and
click "start upgrade". When the data is updated, the printer automatically enters the upgrade
mode.
3. The red [PAPER] indicator will enter a flashing state of on for 1s and then off for 1s. After the
upgrade is completed, the printer will automatically print out the self-checking sample and enter
the normal working mode.
Chapter 3 Printer Driver Installation
Please download the SP-POS8810 series printer driver from our official website
(www.sprt-printer.com). Specific link: Homepage-Service-Download-Driver-Windows Driver; after
downloading, the driver is named SP-DRV211. In the process of installing the driver, the printer
model is selected as "80mm thermal series". For other operations, please refer to the installation
instructions.
Summary of Contents for POS8810 Series
Page 18: ...16 Fig 2 7...
