SPRT POS8810 Series, User Manual

Page: 9 / 23

7
2.2 Paper Installation
2.2.1 Paper Loading
SP-POS8810 printer uses 79.5±0.5mm wide thermal paper roll.
The thermal paper installation steps are as follows:
Raise the door opener to open the cover, insert the paper shaft through the paper roll core (when
there is a paper shaft), pull out part of the paper and put the paper roll into the paper shaft card
slot inside the paper bin, and place the protruding paper on On the movement, align the paper
parallel to the paper exit direction of the movement, and close the upper shell tightly with a little
force.
1. Pay attention to the direction of loading the paper roll so that the printing side faces
the machine head.
2. Do not use your hand to move the paper forward or backward.
3. Keep clean of the print head, avoid to influence the printing quality.
2.2.2 Solution to Paper Jam
If the cutter is jammed, you can pull up the door opener to open the shell, and the cutter will
automatically return to its original position. If there is a paper jam, the cutter can open the shell
and take out the paper.
2.3 Interface
2.3.1 Serial interface
The serial interface of the SP-POS8810 printer is compatible with RS-232C and supports
RTS/CTS and XON/XOFF handshake protocols. The interface seats a DB-9 socket. The
！
Caution!