WWW.SPORTDOG.COM
15
BOTTOM
BUTTON FUNCTION
TOGGLE SWITCH
FUNCTION
UP/DOWN
# of Dogs
Continuous HIGH
stimulation
(Level set by intensity dial)
OR Vibe if V/T on Dial
Dog 1/2
2
Continuous HIGH
stimulation
(Level set by intensity dial)
OR Tone if V/T on Dial
Dog 1/2
2
N/A
UP: Continuous HIGH
stimulation
(Level set by intensity dial)
OR Vibe if V/T on dial
Down: Tone Only
3
N/A
UP: Continuous HIGH
stimulation
(Level set by intensity dial)
OR Tone if V/T on dial
Down: Vibe Only
3
N/A
Dog 1-3 / 4-6
6
N/A
Dog 1-3 / 4-6
6
Continuous HIGH
Stimulation
(Level set by intensity dial)
OR Tone if V/T on Dial
Dog 1/2
2
N/A
UP: Continuous HIGH
stimulation
(Level set by intensity dial)
OR Vibe if V/T on dial
Down: N/A
3
N/A
UP
N/A
*Factory Default Mode
**Programmed Stimulation Level: When
this mode is entered, the unit will enter
level programming mode for 15 seconds
(LED solid green in color) allowing you
to set the desired stimulation level. While
the LED is solid, the user can set the
desired level using the intensity dial and
save it by pressing the top button. The
Transmitter Indicator Light will quickly
fl ash acknowledging your selection. If no
button is pressed within the 15 second
window, the previous value will be used.
If no level has ever been set then the unit
will default to the maximum stimulation
level.
***Program ID: An ID Code is the signal
identifi
cation between the Remote
Transmitter and Collar Receiver. You
may want to change the ID Code if your
Remote Transmitter is sending a signal to
more than one Collar Receiver; or if you
would like to set two or more Remote
Transmitters to the same Collar Receiver,
the ProHunter
®
2525 offers you that
fl exibility.
Once mode 9 is selected, the transmitter
will enter ID code selection for 15
seconds (LED solid green in color). If the
mode is entered and no button pressed,
the ID will revert back to the factory
programmed ID. For detailed instructions
on how to manually program one of 100
user ID codes, see page 18.
