Sprite Electronics SAM-6500D, Owner'S Manual

Page: 10 / 12

- 7 -
Remote Control
The remote control functions are displayable on the screen only when the video
input signal from subwoofer of this system is selected.
@
PWR :
Turns power on and off
MUTE :
Use this to turn off the audio output temporarily.
(LED blinks)
Press again to cancel Muting mode
SETUP :
Sets the following menus/options(see below pg.8) :
-. PRO LOGIC ON/OFF
-. DRC ON/OFF
-. REAR DELAY
-. CHANNEL LEVEL
Use cursors : , , , , ENTER
Press again to return.
SURROUND MODE :
Switches the surrounding mode in the following order each time
this button is pressed :
STEREO(2.1CH)
->
PHANTOM(4.1CH)
->
SURROUND(5.1CH)
INPUT :
Selects different audio input sources in the following order each
time the INPUT button is pressed :
OPTICAL
->
COAXIAL
->
VCR
->
AUX1
->
AUX2
SOURCE DISPLAY :
Displays the surround sound mode at which the audio is being played.
One of following appears on the top-left corner of the screen :
Dolby Digital
Dolby Prologic
DTS
TEST TONE :
Tests output tones of each speaker with 2 seconds interval, in the
order of :
FL
->
CEN
->
FR
->
RR
->
RL
(Press again to cancel test)
DOWN :
Volume level down
UP :
Volume level up