Sprite Electronics SAM-6500D, Owner'S Manual

Page: 7 / 12

FL
RR
RL
CEN
SPEAKER OUTPUT
FR
+
_
- 4 -
Ensure the correct polarity (+) and (-) of all speaker leads. Check to make sure there
are no wires touching on the speaker terminals, and that all wires are firmly clamped
into the terminals.
1. Press the spring loaded terminals to expose holes in the post.
2. Fully insert the stripped portion of the wire into the exposed holes.
3. Release the terminals to clamp the wire into place.
Please note :
When inserting speaker cables into any of the terminals, the black wire goes to
the - (negative)terminal, the black wire white strip goes to the + (positive)terminal.
Front/Rear/Centre(Rear panel of the speakers)
Black wire with white
Black wire
Black terminal
Red terminal
Rear panel of the system subwoofer