18
3.
Once the software has been fully installed, connect your device to your
computer using the supplied USB cable. (Your computer will detect the
connection and a “Found New Hardware” icon may appear in your system
tray.)
4.
Launch the Sprint PCS Connection Manager Software and click
Go
to connect.
(Before connecting, make sure any other Internet connections on your
computer have been disabled.)
5.
Once the connection is established, launch an Internet session, check your
email, or do anything else you would do using a traditional data connection.
6.
When you’re ready to terminate the data connection, double-click on the
Sprint PCS Connection Manager icon in the system tray, then click
Stop
to end
the session.
7.
Disconnect the USB cable from your device and from your computer.
Note:
Before using Sprint PCS Connection Manager with your BlackBerry®
device, you must first install and connect with the BlackBerry® Desktop
Software (version 4.1 or higher). See your
Getting Started Guide
for
details.
Note:
While your data connection is active, incoming calls ring through and can
be answered, interrupting the data session. During a call, the data session
is suspended (you can’t access additional pages), but when the call is
finished, you are returned to your active data session.
