7
FIG.1
ASSEMBLY INSTRUCTIONS
1.
PREPARATION:
A.
Before assembly, make sure that you have enough space around the item.
B.
Use the tools included for assembly.
C.
Before assembly, please check whether all required parts are available (at the top of this
instruction sheet you will find an explosion drawing with all single parts (marked with
numbers) which this item consists of.
2.
ASSEMBLY:
:
FIG.2
FIG.2:
Slide the Vertical Seat Post (pt.10) into the
seat post housing on the main frame
(pt.16), then slide the Seat Post (pt.12)
into the Vertical Seat Post (pt.10). Secure
using a flat washer 1 (20) and L Shape
knob (19). Slacken the knurled section of
the L Shape Knob (pt.42), pull the knob
back and then select the desired height.
Release the knob and retighten the
knurled portion.
Now fix the Seat (pt.13) to the Seat Post
(pt.12) as shown, and tighten the bolts
around the screws under the seat.
FIG.1:
Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of Ø8
Flat Washers (pt.5), M10 Domed Nut (pt.6)
and M10*55 Carriage bolt (3).
Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of Ø10
Flat Washers (pt.5), M10 Domed Nut (pt.6)
and M10*55 Carriage bolt (3).
Fix the bottle holder (pt.22) to the main
frame (pt.16) with the screw (pt.43) and
then slide the bottle (pt.23) into the
bottle holder (pt.22)
Summary of Contents for RACER 2
Page 1: ......
Page 4: ...4 EXPLODED VIEW PARTS LIST...
