Model 340XRi / 680XRi / 1220XRi DC drive product manual HG102909 iss 9
5
The product is enclosed in a stylish DIN rail mounted enclosure
with plug in screw terminal connections.
Height Width Depth
340XRi 105 60 120
680XRi 105 70 120
1220XRi 105 70
120
For Forward / Reverse operation
Move the wire from T1 into T4.
Connect T1 to T6. The pushbutton
inputs T7/8 can then be used for
direction control.
Earthing
A clean signal earth connection should be made to terminal 10 (Common). The motor
earth should be connected to the
earth in the system enclosure.
This is available at
www.sprint-electric.com
‘Downloads’, ‘Technical Data’.
If the unit is to be used in the domestic environment, then for installations in the EU a supply filter
is recommended in order to comply with EN6800-3. Sprint Electric part number FRLN16. For EU
EMC compliance guidelines refer to the above website.
Health and safety at work. Electrical devices constitute a
safety hazard. It is the responsibility of
the user to ensure compliance with any acts or bylaws in force. Only skilled persons should install
this equipment. Sprint Electric Ltd. does not accept any liability whatsoever for the installation,
fitness for purpose or application of its products. It is the users responsibility to ensure the unit is
correctly used and installed.
MECHANICAL DETAILS
Supply
Select
Sw1 AVF
Sw2 Spd x 2
Max Speed
Min Speed
Up Ramp
Stability
Max Current
Comparator
Level preset
Lift up cover
Terminals
12 to 21
A+ A- F- F+ N L
Fan exhaust
For models
680 / 1220XRi
DIN rail
release catch
with bottom
rear access
slot. (Unplug
terminals to
gain access)
APPLICATIONS GUIDE
WARNINGS
Sprint Electric Limited, Arundel, UK
Tel.
+44 (0)1903 730000
Fax.
+44 (0)1903 730893
Email. [email protected]
www.sprint-electric.com
IR Comp
Alarm lamp
Stall lamp
Increasing brightness
for imminent trip.
Power ON lamp
Brighter for positive current.
Down Ramp
Terminals
1 to 11
Armature
Field
Basic single direction speed control with tach feedback
1 2 3 5 9 10 11 A+ A- F- F+
10K Pot
RUN
Tach
Earth
