BATTERY INSTALLATION AND ACTIVATION
Warning:
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries.
•
For maximum performance in normal conditions we recommend using good quality alkaline batteries.
When temperatures are below 32°F, alkaline batteries can lose power resulting in a loss of remote
transmission. If you reside in an area that experiences frequent temperatures below freezing, we recommend
using lithium batteries to minimize the loss of transmission.
Battery installation of Base Unit
•
Remove the vinyl label from the LCD of the base unit.
•
Open the battery door at the back of the base unit and insert (2) AA batteries according to the polarity
markings. Replace the battery door.
•
Insert the end of a paper clip into the hole in RESET and push the button.
•
Set the clock and calendar as follows.
Setting the Calendar, Clock,
°
C /
°
F:
•
When either the clock or calendar is being displayed, press and hold the MODE button for 3-4 seconds until
the year display is flashing
•
Press + or – to set the year
•
Press MODE to display the date
•
Press + or – to set the month and day (Month and day are not set independently. Push and hold + or – to
fast scroll through to the month and day you want to set).
•
Press MODE to display time
•
Press + or – to set the time
•
Press MODE and the display will show 12 hr
Clock
Mode
(
-
)
History
( +)
In-Out Temp
Max/Min
Clear
Alert Reset Re-sync
