PMA82TP-BA
41 / 50
PROXRUNNER BLUETOOTH RFID SCANNER - Reference manual
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
5.5. R
EVERTING TO DEFAULT
Sometimes it is necessary to put reader back in “out-of-factory” configuration
(for instance when reader goes from one site to another). This is done easily by
erasing all tags from reader’s memory.
Create a configuration file (say, “
factory.ini
”) with only those 3 lines :
[master]
aut=E0
xx...xx
clear=1
where
xx…xx
is the site specific 16-byte authentication key
Put a virgin card on the Prox’N’Roll, label it “Erase all Master Card”,
Enter
cfgfilecreator.exe –c
factory.ini
Use this Master Card to put the reader(s) back in out-of-factory
configuration.
Erasing all the configuration tags is not really sufficient to put the reader(s)
back in out-of-factory configuration, since Mifare keys stored in RC’s secure
EEPROM are not erased.
Just add an “rckeys” section, with dummy keys, to overwrite those keys.