___________________1. Safety Data
1.4 No Liability for
Consequential Damage
The Spread-A-Bale has been
manufactured with great care. However,
problems may still occur when it is used
for the intended purpose.
These may include:
• Worn wearing parts.
• Damage caused by external factors.
• Incorrect driving speeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
Instructions).
Therefore, it is crucial to always check
your machine before and during operation
for correct operation.
Compensation claims for damage which
has not occurred to the machine is
excluded. This includes any consequential
damage resulting from incorrect operation.
1.5 Accident Prevention
In addition to the Operating Instructions, it
is important to observe the accident
prevention regulations specified by
agricultural trade associations.
1.6 Changing Equipment
• Use suitable supports to secure any
raised frame sections suspended above
you!
• Caution! Risk of injury due to projecting
parts!
Never climb on to rotating parts
such as the rotor blades. These
parts may rotate causing you to
slip and suffer serious injury!
1.7 Servicing &
Maintenance
Ensure that regular checks and
inspections are always carried out within
the periods required by law or specified in
these Operating Instructions.
When maintaining the Spread-A-Bale unit
please observe the following.
1. Ensure that the unit is isolated from
any hydraulic power source.
2. The unit is securely supported on a
firm stable surface.
3. The rotor head is in the down position.
Prior to performing maintenance and
servicing work, ensure that the machine is
positioned on solid, level ground.
Before cleaning the machine with water,
steam jets (high-pressure cleaning
apparatus) or other cleaning agents, cover
all openings into which, for reasons of
safety or operation, no water, steam or
cleaning agents are to penetrate
(bearings, for instance).
Next, check all hydraulic lines for leaks,
loose connections, chafe marks and
damage. Remedy any deficiencies
immediately!
When carrying out servicing and
maintenance work, retighten any loose
bolts and hydraulic connections.
