___________________1. Safety Data
1.2 Use for the Intended
Purpose
The Spread-A-Bale is built using the latest
technology and in accordance with the
relevant recognised safety regulations.
However, risks of injury for the operator or
third parties and impairment of the
machine or other tangible assets can arise
during use.
The machine is only to be operated when
in a technically perfect condition and for
the intended purpose, taking into
consideration safety and risks and
following the Operating Instructions. In
particular, faults that can impair safety
should render the machine out of
serviceable action until the faults are
remedied.
Original parts and accessories have been
specially designed for this machine. Spare
parts and accessories not supplied by us
have not been tested or authorised.
Installation or use of non-original products
may have a detrimental effect on specific
design features of the machine and affect
the safety of machine operators and the
machine itself. Spread-a-Bale will accept
no liability for damage resulting from the
use of non-original parts or accessories
.
Spread-a-Bale will accept no liability for
damage resulting from improper use such
as blade/rotor debris damage or
contamination to the hydraulic system due
to poor connection hygiene and dirt
ingress. The risk will be borne solely by
the operator.
1.3 Operational Safety
For safe operation only fully qualified and
authorised operators are to use this
equipment. To qualify as an operator, you
must understand the instructions in this
manual, be able to assess the suitability of
the loader you are going to use with the
unit, be licensed to drive the loader and
understand the relevant safety and work
regulations. The actual requirements may
vary depending on where you are and it is
important that you ensure that you meet
the local requirements regarding the use
of such equipment before using a Spread-
A-Bale unit.
Observe the following precautions:
DO NOT use Spread-A-Bale as an
access platform
DO NOT carry passengers whilst
operating Spread-A-Bale
DO NOT operate the equipment with
anyone in the danger zone
DO NOT modify any of the equipment
Operate the unit smoothly with no
sudden movements.
Hitch only to the designated points
Never alter or remove any part of the
equipment
Watch for overhead obstructions
Ensure that the rated load capacity of
the lifter used with the unit is not
exceeded
Keep others well clear of your work
area
Be careful of the welfare of the animals
in any areas where you are operating
Spread-A-Bale
