2
CONTENTS
CONTENTS ..................................................................... 2
FORWARD ..................................................................... 2
INTRODUCTION ............................................................. 2
SPECIFICATIONS ............................................................. 2
DATA SHEETS ................................................................. 3
SAFETY PRECAUTIONS ................................................... 5
Installation Precautions ................................................ 5
General Safety .............................................................. 6
Operation Precautions ................................................. 6
MAINTENANCE .............................................................. 7
WARRANTY ................................................................... 8
PARTS LIST ..................................................................... 9
MAINTENANCE RECORD .............................................. 10
DECLARATION OF CONFORMITY .................................. 11
IMPORTANT: PLEASE READ ALL INSTRUCTIONS BEFORE
INSTALLING OR OPERATING UNIT. SAVE FOR FUTURE
REFERENCE.
PROPRIETARY NOTICE
The information contained in this document is the
exclusive property of
SPRAYING SYSTEM CO.
Reproduction in whole or part is prohibited without prior
consent of
SPRAYING SYSTEMS CO.
FORWARD
The equipment and/or parts described in this document
were manufactured and assembled with quality and high
reliability, which have become synonymous with the
name Spraying Systems Co. The description and
specifications contained herein were effective on the
revision date of this MI. Spraying Systems Co. reserves
the right to alter or modify any unit specification on
Spraying Systems Co. product without notice or
obligation.
INTRODUCTION
This tank washer meets the requirements set forth in EC
Directive 2006/42/EC. The latest motor manufacturer’s
Operation & Maintenance Manual is included with this
tank washer as a separate manual since important safety
precautions pertaining to the installation and operation
of the motor itself are included.
SPECIFICATIONS
Liquid Pressure:
250 psi (17 bar) max.
Flow Rates:
Up to 284 gpm (1075 l/m)
Liquid
Temperature:
200 degrees F (93 degrees C)
max.
Electrical Motor:
120 Volt AC or 240 Volt AC
Tank Diameter:
100 ft. (30.5 m) max.
recommended
Min. Tank
Opening:
Spray Head with two nozzles
fits through a 7.25” (184.1 mm)
dia. opening
Spray Head with four nozzles
fits through a 8.25” (209.5 mm)
dia. opening
Tanks over the specified diameters could possibly be
cleaned adequately depending on the maximum tank
dimension, cleaning solutions being used, temperatures,
spray pressures, flow rates and the material being
cleaned from the tank.
The tank washer may be used with plain water or with a
variety of chemicals (compatible with 316 SS, ethylene
propylene rubber, and carbon graphite filled Teflon
®
).
However, if chemicals are used, review MSDS sheets and
chemical compatibility with material used to construct
this product. Also, the unit should be flushed with clean
water at the end of the day before the unit is stored. A
liquid line strainer ahead of the unit is recommended to
remove large particles which may damage the unit.
Summary of Contents for TankJet AA290E-EP Series
Page 3: ...3 DATA SHEETS ...
Page 4: ...4 ...
Page 9: ...9 PARTS LIST ...
Page 10: ...10 MAINTENANCE RECORD Date Procedure Performed ...
