5
SAFETY PRECAUTIONS
YOUR SAFETY AND THE SAFETY OF OTHERS IS
EXTREMELY IMPORTANT.
We have provided important safety messages in this
manual for your product. Always read and obey all safety
messages.
Safety alert symbols alert you to hazards that can kill or
harm you as well as others. The safety alert symbol and
the words “DANGER” and “WARNING” will precede all
safety messages. Read the following words and what
they signify:
DANGER: You may be killed or seriously
injured if you don’t follow these instructions.
WARNING: You may be seriously injured if you
don’t follow these instructions.
All safety messages will identify the hazard, tell you how
to reduce the chance of injury and tell you what can
happen if the safety instructions are not followed.
NOTE: Certain atmospheres within the tank being
cleaned could become explosive, such as dust particles
in a flour silo, or fumes in paint mixing tanks. For this
reason, the following safety precautions should be
observed.
INSTALLATION PRECAUTIONS
Qualified personnel must perform all work required to
assemble, install, operate, maintain and repair this
equipment. Improper installation and operation can
result in severe personal injury and/or damage to
property. Correct installation is your responsibility.
WARNING:
Install proper guards as needed.
Follow basic lifting guides when transporting or
handling this product. Failure to follow this
instruction can result in back injury, burns or other
serious injury.
CONNECTIONS
Please refer to datasheet 290E-EP during installation.
Also reference the instructions for the electric motor
shipped with the 290E-EP tank washer. Connect the
power supply to the conduit connection hole as shown
on datasheet 290E-EP, and verify that the nozzle hub
rotates clockwise when viewed from the nozzle hub end.
Connect the liquid line to the inlet connection of the
liquid inlet body.
WIRING
Route cabling through the most appropriate conduit
entry making sure that cables will not foul on the cover
assembly or internal components after refitting. Refer to
the motor wiring diagram for connection details. Wire
type must meet local and certifying agency (CSA, IEC Ex,
ATEX, etc.) requirements and have a minimum
temperature rating of 88°C.
MOUNTING
Bolt or clamp the unit to the tank to be cleaned as
dictated by the mounting flange provided. Adjustable
flanges allow easy positioning of the tank wash unit
to various spray depths for maximum cleaning
effectiveness.
LIQUID INLET CONNECTION
Proper installation requires liquid supply line (pipe, hose,
etc.) meet or exceed maximum working pressure. Use of
PTFE Pipe Tape or other appropriate sealant compatible
with your process fluids is highly recommended for leak
free connections.
DANGER:
Failure to install the tank washer with
insufficient connections could result in leaks
and/or explosion. If you do not follow these
instructions, you may be killed or seriously injured.
MECHANICAL CLEARANCES
Proper installation requires that sufficient clearance be
maintained between the rotary housing and nozzles of
the tank wash unit and any internal baffles or the walls of
the tank being cleaned.
DANGER:
It is your responsibility to ensure that
there is no possibility of the moving parts
coming in contact with fixed objects. Failure to
install the tank washer with sufficient clearances could
result in the generation of sparks with a resultant
explosion or fire. If you do not follow these instructions,
you may be killed or seriously injured.
Summary of Contents for TankJet AA290E-EP Series
Page 3: ...3 DATA SHEETS ...
Page 4: ...4 ...
Page 9: ...9 PARTS LIST ...
Page 10: ...10 MAINTENANCE RECORD Date Procedure Performed ...
