7
d. Insert the vertical shaft/ rotor assembly thru the
bearing bushing (21) in the lower cap assembly .
Screw the vertical shaft into the tee (12) and
tighten . Secure all shafts to the tee (12) by
installing the 3 set screws (13). (Apply 20 in/lbs).
e . Screw the body (2) onto the lower cap assembly .
f . Insert the motor (3) into the top of body until the
motor locates on the body shoulder . Screw the
inlet cap (1) to the body and apply 80 ft/lbs.
g . Install the nozzles (10) into the nozzle bodies .
(Apply 80 ft/lbs).
WARRANTY
For newly purchased units the warranty is 18 months
from the date of shipment or 12 months from the date of
installation, whichever occurs fi rst. This warranty includes
manufacturing defects but does not cover the wear parts
that include the bushings . This warranty will be void if parts
other than those supplied by Spraying System Co . are
used .
