1
2
3
4
5
6
OVERVIEW
1
1
2
4
5
3
① Power Button
② Status LED
③ Charging Port
④ Container
⑤ Silicone Bristles
CHARGING
2
Fully charge the cleaner before first use.
Status LED
Description
Red
Charging
Green
Fully Charged
Flashing Red
Low Battery
Do not use the cleaner while charging.
QUICK START GUIDE
Automatic Dog Paw Cleaner
WASHING PAWS
3
1. Add a little water.
2. Press the Power button.
3. Insert the paw to wash it.
The status LED will turn blue if the silicone bristles
get stuck by the paw. In this case, take the paw out
of the container, then insert it again.
4. After washing, press the Power button to stop.
When the cleaner is powered on, do not twist the
container in the opposite direction.
Model: T7240
CLEANING
4
1. Take out the container, then pull the silicone
bristles out of the container.
2. Clean the container and silicone bristles.
Dry the outside of the container before putting it
back.
