Spraying Systems Co 1550+ AutoJet, Owner'S Manual

Page: 45 / 86

45
Anticipator Time: User adjustable 0 – 60.0 sec.
Follower Time:
User adjustable 0 – 60.0 sec.
Pump Specifications
Port sizes:
Fluid inlet/outlet 3/8” NPT/ 1/2” NPT
Exhaust 3/8" NPT/ 3/8” NPT
Inlet air 1/4” NPT/ 1/4”NPT
Material:

Standard version
o
Body wetted areas Polypropylene
o
Diaphragm PTFE
o
Check Valves PTFE

Food Contact version
o
Body wetted areas 316 stainless steel
o
Diaphragm PTFE
o
Check Valves PTFE
Note: The following specifications are based on water.
Viscosity = 1cP; Temp 68° F; Specific Gravity = 1.0
Maximum fluid working pressure 100 psi (0.7 MPa, 7 bar)
Maximum/minimum air pressure 100 psi / 20psi (0.7 MPa, 7 bar) / (0.14 MPa, 1.4 bar)
Maximum pump speed 300 cycles per minute
Volume per stroke 0.02 gal (74 cc)
Maximum suction lift dry 5ft.(1.5m)
Maximum size pump-able solids 0.04 in. (1 mm)
Maximum liquid temperature 140° F (60° C)
Maximum air consumption 9 scfm (250 NL/min)
Expected Diaphragm Life (days)* depends on application
Note: Viscosity of fluid being pumped will have a significant effect on these specifications.