Spraying Systems Co 1550+ AutoJet, Owner'S Manual

Page: 12 / 86

12
Position or Mount the System
Find a convenient location for the Model 1550+ AutoJet Modular Spray System within a reasonable distance of your spray
application. Additionally, the system should be located within a reasonable distance to an easily accessible and properly
grounded power outlet. The unit must be installed in such a manner that when the cord is connected, the plug can be
easily reached and not difficult to remove it from the outlet.
Determine if the unit will be free-standing or wall mounted.
The unit may be wall mounted by using the keyholes near the top of the enclosure back plate. If the unit is to be wall
mounted, install wall anchors that are designed to support at least 200 lbs. (90.7 kg) according to the anchor manufacturers
specifications.
The mounting holes are on 8” centers and are made for 5/16” (8 mm) screws with ½” (12 mm) diameter screw heads.
Secure the Model 1550 to its selected location.
Note: If it is a system with a pump, keep the pump close to the liquid level in the tote. Keep suction level to a maximum of
5 feet (1.5m).
Note: For safety the unit should be removed from the wall to perform any maintenance or repair.