CONNECTING YOUR PHONE
SETTING UP THE AURA PROFESSIONAL UC™
Refer to the Connection Diagram on Page 5 for the modes described
below.
1 – For PSTN (Analog phone) Mode
A. Plug one end of the 21’ (6.5m) long Power Extension Cable
8pin connector to the “EXT” port on the Junction box. Plug the
other end into the jack labeled “POWER” on the phone.
B. Plug one end of the Telephone Line cable to the 6pin “LINE”
port on the Junction box. Plug the other end into a Wall Phone
port or an Analog Phone RJ11 6pin port.
2 – For USB Mode with a PC/Mac
Connect the USB type B plug into the phone’s USB port. Connect
the other side, USB type A, into a USB 2.0 port on your PC/Mac .
3 – If you have Optional External Microphone
(not included in the box)
Connect the External Microphone Cables from the phone’s
“ EXT 1” and “EXT 2” jacks to the 4pin jacks on the External
Microphones.
4 – Last Step
Plug the Power Adapter DC jack into Junction Box’s “DC INPUT”
socket, and then plug Power Adapter to a wall AC outlet.
SELF DIAGNOSTIC
Plugging in the conference phone initiates the self-diagnostic
program. This is to ensure all the internal function blocks are good
and working correctly.
1. The Green, Red and Blue LEDs will flash sequentially.
2. A tone will be heard when the diagnostic completes without error.
The phone is now ready to use.
6
