65
7. INCLINE BUTTON
1. To choose program & level (Manual, P1 ~ P12, H1 ~ H3, U1 ~ U2, L1 ~ L3).
2. To increase or decrease incline.
3. To do adjustment of set data.
SECONDARY CONTROL PANEL OPERATION(0.8 ~ 6KPH)
Once master console is flipped down, insert safety key, Time on secondary control panel will light up
for operation.
1. Press Start button to begin exercise, Time flashes as Scan mode to display TIME, SPEED,
DISTANCE, CALORIES, PULSE, and STEP in sequence.
2. In Scan mode, when adjusting speed, it jumps to SPEED, 5 seconds after, it starts to re-scan and
jumps to DISTANCE, then CALORIES, PULSE, and STEP in sequence.
3. In scan mode, when user wears transmitter, it will jump and stay on PULSE to show heart rate.
Then you may Press MODE to jump to STEP. Press MODE again, TIME flashes, to switch back
to scan mode to show all function in sequence. When user takes off transmitter to stop detecting
pulse, it restarts to scan from STEP, then TIME, SPEED, DISTANCE, CALORIES, and PULSE in
sequence.
4. In scan mode, whenever user holds both hands on the pulse plates to detect pulse rate, it will
jump and stay on PULSE. And after user leaves their hand from pulse plate to stop detecting
pulse rate, it jumps to STEP to re-scan all function in sequence. Or, just press MODE to jump to
STEP.
5. To focus on specific function, just press MODE button to select the one you prefer.
